Question 1

1) How to set up & install above ground pool pump?

Accepted Answer

Setting up and installing above ground pool pump is quite easy if you know the little basics. If you follow these directions carefully, you can conveniently install the pool pump by yourself with the need of any professional: First, you have to take a solid base to keep the pump level balanced and avoid future problems due to the pump and filter not being on level ground. Once you have placed the pump, connect the standard 1.5" hoses to intake and exhaust ports. Now before plugging in the system, check the filter basket systems and horse seals are completely closed. Now switch on the plug and let the pump run for a while. If your pump doesn't have a built-in timer, you can purchase a smart home outlet after checking its ratings & reviews online for the heavy amperage draw of the pool, and you are done with the installation!

Question 2

2) How to calculate the flow you need?

Accepted Answer

People always get confused to calculate the exact flow rate they need for their pool. The flow rate you need will depend upon your pool size & its characteristics. To preserve adequate water, the filtration cycle must be able to process and filter all the water in the pool under the 4-6 hours. You can calculate the flow rate by dividing the pool volume to the 4 (number of hours) to get an average idea. However, the result you get by applying this rule will be minimum and you must oversize the rated flow of your pump by a factor of 1.2 to 1.5.

above ground pool pump motor

Best Above Ground Pool Pump of 2022 [An Ultimate Guide For You]

Quality content