Leaky tub? Frustrating, isn’t it? If normal water and plumber bills are not pricey enough, this irritating situation has just been added to your expenses. How do you fix a leaky faucet?
The tub situation can be avoided if you are just careful, but what’s done is done. This article will help you fix leaky tub faucet fixtures of any kind without the need for expenses. Although a leaky faucet is quite hard to manage, it isn’t impossible to fix. A few preliminary steps can make fixing the leak easier.
Fix A Leaky Faucet – What Causes A Leaky Faucet?
The friction that occurs during each use (when the washer is forced against the valve seat) results in continuous dripping. When faucet handles are turned tightly, the seals are grounded further, causing water to drip from the faucet. Improper handling of the washer during the installation of the tub may lead to a faucet leaking as well. Loosening of the O ring, which maintains the position of the faucet handle, can also contribute to the leakage near the handle.
The washer wearing out results in a leaky faucet accompanied by constant dripping through the handle, the sound of which is a nuisance to everyone.
Fix A Leaky Faucet – Problems Caused By A Leaky Faucet
- Continuous leaking results in wastage of water
- Annoyance caused by the dripping sound
- Accumulation of excess water in the floors making the washroom wet and slippery (and could lead to water damage)
- Increased water bills
Fix A Leaky Faucet – Categories of Faucets
Faucets can be categorized as compression, disc, ball, and cartridge faucets. Cartridge faucets, which are primarily in use now, are very convenient and easy to use. There are single-handle faucets and double handle faucets.
Single handle faucets change temperature with the side to side movement and water flow with up and down movements. The double handles ones can’t be used to perform both the tasks at once and are thus considered less convenient than single handle ones.
Fixing Single Handle Leaky Faucets
Follow our easy guide to learn how to fix a leaky tub faucet single handle on your own:
Switching the Power Supply Off
The primary step to fixing the leakage would be to turn the water supply off. If your power is on, it might interfere with the whole process. So before you start any work on the faucet, make sure the water supply has been switched off.
Maintaining the Water Valves
Tighten the water valves after switching the water supply off. If your tub has no plugs, the main water supply line needs to be turned off for the time being. Tightening the valves will make the process smoother during the draining process.
Draining the Water
This step might be time-consuming, but it is necessary to remove all the excess water remaining after tightening the valves.
Pliers, screwdrivers, a wrench, Teflon tape, a pocket knife, some lubricant, grease, etc., are the tools you’ll need while working alone. Most people have them in their garages at home, but you can always get them at plumbing shops if you don’t have them already.
Handle And Bonnet Removal
The handle has to be removed first. Use a knife to remove the plastic cap on the faucet, which exposes the screw that holds the handle locked in place.
Identifying the Source of the Leak
The leakage could be due to the worn-out cartridge or may be due to the loosening of the O ring and the packaging retainer ring. The rings can be replaced by removing them with a knife. Give new rings a coating of grease before replacing the damaged ones.
If the cartridge has been worn out, then the entire cartridge must be replaced by pulling it out with pliers. The new cartridge must be installed carefully to prevent any damage to the faucet.
Installing the Handle Again
After the cartridge has been replaced, reassemble all the parts you found initially, starting from the bonnet and ending to the base of the faucet and finally screwing the handle up. Turn the water valves and run the water. Check for any remaining leaks. Make sure all the parts fit, and you’re good to go.
Fixing Double Handle Faucets
The entire procedure remains the same, but with a double handle faucet, both the handles need to be removed and reinstalled.
Below are some steps you can take to prevent this situation from occurring too frequently?
- Make sure that the valves are closed tightly at first and then turned on at the end. The valves are a vital point in regulating the flow of water. Slight improper handling of the valves may disrupt the entire procedure.
- Do not forget to use grease on the O rings after newly replacing them.
- The replaced cartridge must be introduced properly, and if not installed carefully, it might lead to a leakage all over again.
- After removing the bonnet, the parts should be arranged so that it is easy to identify the positions of the parts.
Use a vinegar solution as a lubricant to make work easier.
While fixing a leaky faucet is a lengthy process that you can pay a plumber to handle, it is simple enough to learn how to fix a leaky tub faucet double handle or single handle. With our guide, anyone can easily take the task and avoid the issues and problems associated with leaking faucets.
Fix A Leaky Faucet – Problems Associated With A Faucet
A faucet is a significant component of your water heater. It is the only water outlet from your water heater, making it a crucial part. A faulty tap is likely to cause other problems to your water in return, maybe costly when doing the repairs. Below are some of the fundamental issues associated with a faucet;
A leaky faucet is the most familiar spout issue in every home experience. It is more common than other water heater faults. A leaky faucet can be annoying if it keeps dripping water at all times. It can also cause damage to the washer. A leaky faucet can be hazardous too if the leaking waters touch the floors and become slippery.
Drip-drip sound is enough to ruin your day. A leaky faucet leads to a lot of water wastage. A dripping tap can destroy metal that is prone to corrosion.
Low Water Pressure
Low water pressure can be very frustrating. You have to wait for ages to have enough water. Old faucets are among the major causes of low water pressure from your faucet. Tiny holes on the spout are likely to block time and again hence causing lower water pressure. Clogging and leaking of pipes also slow down water flow, therefore, lowering the water pressure.
No Water Coming Out
How interesting? Turning on the faucet, and no water. It is a severe faucet problem. Faulty valves can be the cause of such an issue; since they can turn off water access. A faucet inner chambers may be faulty too. Cleaning the valve and the faucet inner chambers can solve this problem. However, you may have to seek professional help from a qualified plumber; if clean doesn’t work for you.
Rust And Stains
A faucet that is not rustproof is likely to rust over time. The inner surfaces and the outer parts of the faucet may corrode; this is common in areas with hard water. If the faucet’s rim rusts, it may change the water quality in your home. The water too may not fit human use; therefore, clean the faucets regularly, just like regular bathroom routines.
Any noise at any time is a nuisance, and a noisy faucet is not exceptional. Pitching, whistling and chattering are the standard faucet’s noises. A professional plumber can identify the root cause of the noises. Faulty pipes can be associated with such noises but seek professional assistance.
For some of the faucets, as mentioned earlier problems, you repair by yourself; but always seek professional assistance not deteriorating the fault.
Fix A Leaky Faucet – Major Causes Of A leaky Faucet
Drip-drip sounds are irritating. They may make your day longer than usual. Identifying the root causes of a leaky faucet can be a great relief. Once you understand the reasons, fixing a leaky tub faucet becomes even more straightforward.
Below are some of the common causes of a leaky faucet;
An O-ring is a disc connected to a screw’s stems, and its purpose is to hold the faucet’s handle in place. If the o-ring wears out and loosens, there is a high possibility that the tap will start leaking.
A faucet leak may be a result of a faulty faucet cartridge itself hence the need for replacement. The faucet for replacing the existing one should be its match to avoid malfunctioning.
Corroded Valve Seat
A water valve connects the faucet and the spout. If water leakage comes from the tap, then the valve seat may be faulty. Debris buildup can cause the corrosion of the valve seat, thus causing water to leak. Clean the valve seat regularly to avoid corrosion with the help of a professional plumber.
A worn-out washer is another significant cause of a leaky faucet. Washer attached to the seat valve; may cause the friction between the two components causing corrosion over time; hence it wears out. Inappropriate washer installation and wrong size can also lead to a leaky faucet. Have the right washer size and install it correctly to avoid leakages.
Faucet seals can also corrode, just like the valves and the washers. Corroded seals, inlets and outlets can cause a faucet to leak. Debris accumulation is the reason behind the seal’s corrosion; therefore, make it a habit of flushing out the sediments.
Water pressure is the next cause of faucet leakage. Water pressure is the problem if the drip is occasionally happening or when the handles turn in specific directions.
The faucet is used daily; it consists of an adjustment ring and packing nuts that can loosen over time. The loosening of the two components is likely to bring about water leakages from the faucet. Tighten the two to avoid leakages. You can also replace the packing nuts if it is completely worn out.
Broken parts are the significant causes of water heaters malfunction, and the same case applies to your faucet. If you have a broken pipe or fitting, you are likely to experience faucet leakages.
Fix A Leaky Faucet – Procedures Of Fixing A Leaky Faucet
After identifying the root cause of your leaky faucet, you know the action to take. Some repairs require no professionals; you can do it yourself (DIY), but some call for professional assistance. The following simple procedures to follow when repairing a leaky faucet;
« Firstly, identify your faucet type. There are common faucet types; ceramic disk, ball and cartridge faucet. Identification of your faucet helps when doing replacements.
« The next step is turning off the water supply to your leaky faucet. Check out the under sink pipes to reach your cut-off valves. There are hot and cold cut-off valves. Turn off the two valves.
« Use rags or sink plugs to plug your drain; it helps you not lose small components.
« The fourth step is removing your handle knob’s decorative part. From the stems, go ahead and unscrew the handle from the stem. Remove the handle. It is crucial to learn how to fix a leaky tub faucet double handle.
« After unscrewing and removing the handle, it’s now time for loosening the packing nuts followed by the stem. In case the parts are damaged, you can go ahead and replace them.
« In the valve seat, examine the washer and the o-ring. Replace the two if need be.
« It is now time to reassemble your sink components. Do it carefully to avoid malfunctioning.
« If all those procedures won’t work, it is advisable to reach out to a professional plumber for assistance.
Fix A Leaky Faucet – Common Causes of Water Not Flowing From Your Faucet
Faucet’s primary role is to let out of pipes; if it doesn’t, that is a great inconvenience. The faucet may fail due to an endless list of causes;
At times the problems of no water on the faucet may be associated with the waterline. If, for instance, there is no water on your bathroom’s faucet, check all the faucets in your home to be sure whether it’s the waterline. Word of mouth remains a significant help in most situations; check with your neighbors to see if they are experiencing water problems. Contact your water supplier for help if no neighbors are facing the same problem as you.
Faulty Water Valves
Water valves’ key responsibility is to supply water to all your home’s sources. In situations where valves are not opening or faulty, then all your faucets fail. Check whether the valve is open and functioning appropriately to solve this problem. Call a plumber if the valve is not opened and is malfunctioning.
Damaged Tap Washer
At times lack of water from your faucet may be a result of a dislodged tap washer. The typical symptom of a dislodged tap washer is infrequent water from the faucet followed by no water at all. To be sure of what you suspect, consider checking all the faucets in your home. If they are working, it is advisable to replace the tap washer.
It is another underlying cause of no water coming from the faucet. Frozen pipes happen due to sudden temperature changes, too high temperatures followed by shallow temperatures below zero degrees. To unfreeze the lines, you can use an ordinary hair dryer or heat gun.
Carry the procedure carefully to avoid bursting the plumbing pipes, which can cause flooding in your home.
Water leakages are notorious causes of no water from your faucet. All the water may drip on the way before reaching your tap. Water leaks lead to water siphoning, which lowers the water pressure, hence affecting the operations of your faucet. Examine the water line supply in your home to see if there are any water leaks. You may not know how to fix a leaky tub faucet single handle, but a plumber will help you.
If you find any leaks and drips, contact your plumber for repairs and replacements immediately to curb more severe problems.
Old Pipes and Components
Pipes that have existed for many centuries can lead to a lack of water on your faucet. The pipes’ size may be another issue due to old age. Out of these problems, the water pressure may be low; hence no water on the faucets. If you notice funny sounds when you put on water, the problem could be the pipes and components.
Rusted Water Pipes
Pipes that have been installed for a long time can have rust on them. Daily wear and tear can cause corrosion on your faucet also. Orange colored water may indicate rust build, which causes the faucet to malfunction. The water line may suffer debris blockage resulting in rust build ups hence improper functioning of the faucet.
The fault may be a bit severe; therefore, it’s advisable to look for assistance from a professional plumber.
Airlocks in the plumbing system
Airlock bubbles in your plumbing system can be unbreakable. The formation of an airlock on the plumbing system can stop water from flowing through the pipes. Remove the airlock from lines to ensure no water flow interruptions to your faucet.
Firstly, when a water pipe clogs, there will be little or no water flow on your faucet. There is a clogged pipe issue in a situation where there is no water from all sources in your home. Clogging occurs as a result of debris build up in your water pipes. Other causes of clogged pipes are deposits of heavy metals and lime. If your clogging suspicions are correct, then it’s a wise decision to call a plumber who video inspects the issue.
Fix A Leaky Faucet – How To Maintain A Faucet
The idea of maintaining your home’s faucet never leaves your mind until the faucet is faulty. Frequent maintenance of your faucet is an assurance of its longevity. If you make it a habit to maintain your faucet often, you can save a lot of money in the long run. You save time also if you practice regular maintenance for your faucet.
Start maintaining your faucet as well as it is freshly installed to make it more reliable. Here are simple tips to assist you with the maintenance of your home’s faucet;
It is quick and straightforward to take care of your faucet daily. A mild cleaning using a simple cleanser and ordinary damp clothes do magic to your faucet. Commonly you use your window pane’s cloth to clean your faucet.
Be careful of the detergent you use for cleaning your faucet to void, deterring the faucet’s surface. Use furniture polish for the faucet’s surface uniformity and also for the maintenance of the showroom look.
Clean and Remove Deposits
If you live in an area with hard water, you will have to deal with frequent sediments on your faucets. It is due to lime deposits on faucets and fixtures. In some cases, the cleaning can be challenging due to the recurring lime deposits. However, regular use of a window cleaner or mild scrub to clean the faucets does an excellent job. Vinegar, too, is a great cleanser and being environmentally friendly is its added advantage.
Go lime dissolver and harsh cleansers in case of severe deposits.
Clean or replace the aerator
Aerator components are housing, washers and screen inserts. Its crucial role is mixing water and air for smooth water flow from your faucet. Many times we forget that aerators are vulnerable to debris and other minerals. The recommended cleaning of aerators is once per year so as it extends its life expectancy.
When cleaning the aerator, remove it from the faucet. Flush out any debris on it using water. Soak the aerator in vinegar if your water is hard to remove debris. Sometimes it’s advisable to do the aerator replacement instead of struggling to clean it. Aerators are readily available in the market and affordable.
Fix A Leaky Faucet – Final Verdict
You use faucets daily in your home. You may encounter multiple problems with your faucet daily; always ensure you identify them for repair or replacement. The maintenance of your faucet should be done daily. Know you have all the information about a tap; best quality, care, etc.